Table of Contents
Advertisement
SECTION 8 –
ENTERTAINMENT
5. Rotate Attenuator Dial COUNTER-
CLOCKWISE until the last illuminated LED
light flickers.
6. Rotate antenna to illuminate the last flickering
LED light.
7. Repeat Steps 5 and 6 to pinpoint signal
reception.
NOTE: Refer to television manufacturer's
instructions to scan for available
channels.
Further Information
See the antenna manufacturer's user guide
provided in your InfoCase for complete operating
and maintenance information.
TV ANTENNA
–If Equipped
The TV antenna on your motorhome is a
stationary omnidirectional design. The antenna
provides reception of VHF/UHF TV channels. A
built-in signal amplifier designed to strengthen
signals, is controlled by a power switch built into
the optional video selector panel or on a wall
plate assembly.
WARNING
Never allow the antenna to touch
electrical power lines or any other
electrical wires. Death or serious injury
can occur.
Further Information
See the antenna manufacturer's operation,
care, and maintenance information in your
InfoCase.
TV SIGNAL AMPLIFIER
The TV Signal Amplifier is built into the
antenna and can be turned on or off with a power
switch.
An indicator light will illuminate when the
switch is on and the signal amplifier is active.
8-4
TV Signal Amplifier Power Switch
(Located in an overhead cabinet or mounted
on a wall near the TV)
-Typical View
EXTERIOR CABLE TV
CONNECTION
The exterior cable TV connection receptacle
on your coach provides connection for use of a
TV for your outdoor entertainment..
Exterior Cable TV Connection
(Located near entrance door)
-Typical View
• Power
Switch
Advertisement
Table of Contents
