Table of Contents
Advertisement
Getting started
Unlocking
Starter switch positions
Warning!
When leaving the vehicle, always remove the
SmartKey from the starter switch, take it
with you, and lock the vehicle. Do not leave
children unattended in the vehicle, or with
access to an unlocked vehicle. A child's
unsupervised access to a vehicle could
result in an accident and/or serious
personal injury.
40
G
Starter switch
0 For removing SmartKey
1 Power supply for some consumers
2 Ignition (power supply for all consum-
ers) and drive position. All lamps (ex-
cept high-beam headlamp indicator
lamp and turn signal indicator lamps
unless activated) in the instrument
cluster come on. If a lamp in the instru-
ment cluster fails to come on when the
ignition is switched on, have it checked
and replaced if necessary. If a lamp in
the instrument cluster remains on after
starting the engine or comes on while
driving, see "Lamps in instrument clus-
ter" ( page 304).
i
When you switch on the ignition, the
indicator and warning lamps (except high-beam
headlamp indicator lamp and turn signal indica-
tor lamps unless activated) in the instrument
cluster come on. The indicator and warning
lamps (except high-beam headlamp indicator
lamp and turn signal indicator lamps if activated)
should go out when the engine is running. This
indicates that the respective systems are
operational.
!
If the SmartKey is left in the starter switch
position 0 for an extended period of time, it can
no longer be turned in the starter switch.
Remove the SmartKey from the starter
switch and reinsert.
If the SmartKey can still not be turned in the
starter switch, the starter battery may not be
sufficiently charged.
Have the starter battery checked and
charged if necessary ( page 371). Contact
an authorized Mercedes-Benz Center.
To prevent accelerated battery discharge and a
possible dead battery, always remove the Smart-
Key from the starter switch when the engine is
not in operation.
Advertisement
Table of Contents
