Table of Contents
Advertisement
You can select from among the
following settings:
DRV
: The tone level is set to the
Driver position; sound is directed
toward the passengers.
SP
: The tone level is set for Speech,
optimizing the sound for the spoken
word.
AMB
: The tone level is set for
Ambience, producing a
three-dimensional sound.
OFF
: The audio system sound
selection is turned off.
Telephone muting
The radio will switch to telephone mode
when a call is incoming. The current audio
source is muted.
Radio operation
Selecting radio mode
Press b button.
You can now receive radio stations
over the analog FM, AM or WB station
frequencies.
Analog station frequencies
Selecting the band
You can select from among FM, AM or WB
frequency bands.
Weather band ( page 154).
i
FM frequency band:
FM
87.7......107.9 MHz
AM frequency band:
MW (medium wave) 530......1710 KHz
Controls in detail
Audio system
Press FM, AM or WB key repeatedly
until desired band has been selected.
The FM, AM and WB frequency bands
are called up one after the other.
The frequency band currently selected
appears in the upper left-hand corner
of the display.
Selecting a station
The following options are available for
selecting a station:
Direct frequency band input
( page 152)
Manual tuning ( page 152)
Automatic seek tuning ( page 152)
Scan tuning ( page 153)
Preset buttons ( page 153)
Automatic station memory (Autostore)
( page 153)
151
Advertisement
Table of Contents
