Mercedes-Benz 2009 G-Class Operator's Manual page 232

463_AKB; 2; 52, en-US
d2ureepe,
Replacing bulbs
230
X
Insert the bulb socket back into side
marker lamp housing ;.
X
Reinstall dust cover =.
X
Reinstall side marker lamp housing ;.
X
Install and tighten securing screws :.
i Do not overtighten securing screws :.
Otherwise side marker lamp housing ;
could be damaged.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following:
X
Switch off the ignition.
X
Turn the exterior lamp switch to position
$.
Removing/installing rear lamp guard
(G 55 AMG only)
X
Remove screws ;.
X
Swivel rear lamp guard : outward. Make
sure the guard does not strike painted
surfaces.
X
Swivel rear lamp guard : back after
replacing bulbs and fasten it with
screws ;.
Tail lamp unit
X
G 55 AMG only: Remove the rear lamp
guard.
2008-12-02T10:52:11+01:00 - Seite 230
Version: 2.11.7.1
Example illustration: Left tail lamp lens (right tail
lamp lens laterally reversed)
X
Loosen and remove securing screws :.
X
Remove tail lamp lens ;.
Example illustration: Left tail lamp unit (right tail
lamp unit laterally reversed)
Turn signal lamp bulb
=
Brake, tail, parking and standing lamp
?
bulb
Tail, parking and standing lamp bulb
A
X
Gently press onto respective bulb =, ?,
or A and turn counterclockwise out of its
bulb socket.
X
Gently press the new bulb into the bulb
socket and turn clockwise until it engages.
X
Reinstall tail lamp lens ;.
X
Install and tighten securing screws :.