463_AKB; 2; 52, en-US
d2ureepe,
Replacing bulbs
228
recommended to have such work done by a
qualified technician.
Front fog lamp bulb
Example illustration: Right front fog lamp (left front
fog lamp laterally reversed)
X
Loosen and remove securing screws :.
X
Remove front fog lamp trim panel ; in
direction of arrow and the seal.
X
Loosen and remove front fog lamp-
securing screws =.
i
Do not turn adjusting screw ?. If
adjusting screw ? is turned, the front fog
lamp adjustment must be checked at a
Mercedes-Benz Center.
X
Remove front fog lamp A.
2008-12-02T10:52:11+01:00 - Seite 228
Version: 2.11.7.1
X
Hold front fog lamp A, gently push onto
bulb socket B, and turn bulb socket B
counterclockwise to its stop.
X
Pull bulb socket B out of front fog lamp
A.
X
Pull bulb C out of its bulb socket.
X
Insert the new bulb into the bulb socket
B.
X
Hold front fog lamp A, insert bulb socket
B into front fog lamp A, and turn bulb
socket B clockwise to its stop.
X
Insert front fog lamp A and install and
tighten front fog lamp-securing screws =.
X
Install front fog lamp trim panel ; and the
seal.
X
Install and tighten securing screws :.
Front turn signal lamp bulb
X
G 55 AMG only: Disengage the turn signal
guard from the clip in the rear and fold it
forward. Make sure the turn signal guard
does not strike painted surfaces.