3
Getting Started
Using the Battery Pack
Installing and Removing the Battery Pack
Your Notebook PC may or may not have its battery pack installed. If your Notebook PC does not have
its battery pack installed, use the following procedures to install the battery pack.
IMPORTANT! Never attempt to remove the battery pack while the Notebook PC is
turned ON, as this may result in the loss of working data.
1. Remove all cables.
WARNING! The modem
cable must be discon-
nected from the wall out-
let to prevent electrical dis-
charge when opening the
Notebook PC's casing.
3. Remove the following screws.
1
2
26
1
1
1
2
2. Lock the battery power.
Unlock
Installing the battery pack: Insert the outer side
and then press down on the inner side.
2
Removing the battery pack: Lift from the inner
side.
Lock