Mercedes-Benz 2008 M-Class Operator's Manual page 247

Controls in detail
Driving systems
Activating cruise control
You can activate the cruise control when
the vehicle speed is above
20 mph (30 km/h).
In the following cases you cannot activate
the cruise control:
when you brake
when you have set the parking brake
when the automatic transmission is set
to position P, R, or N
®
if the ESP is switched off
®
if the ESP has switched off due to a
malfunction
i
The vehicle speed displayed in the speedom-
eter can briefly vary from the speed setting for
the cruise control system.
246
Setting current speed
Accelerate or decelerate to the desired
speed.
Briefly lift the cruise control lever in
direction of arrow 1 or depress in
direction of arrow 2.
The current speed is set.
Remove your foot from the accelerator
pedal.
The cruise control is activated.
The currently set speed appears in the
status indicator of the multifunction
display:
USA only:
Cruise XXX Miles
Canada only:
Ñ
XXX km/h
i
On uphill grades, the cruise control may not
be able to maintain the set speed. Once the
grade eases, the set speed will be resumed.
On downhill grades, the cruise control maintains
the set speed by braking with the vehicle's
braking system. In addition, on longer downhill
grades the automatic transmission will down-
shift automatically.
Canceling cruise control
There are several ways to cancel the cruise
control:
Step on the brake pedal.
The cruise control is canceled. The last
speed set is stored for later use.
or
Briefly push the cruise control lever in
direction of arrow 3 ( page 245).
The cruise control is canceled. The last
speed set is stored for later use.
i
The last stored set speed is canceled when
the engine is turned off.