Mercedes-Benz 2007 SLR Mclaren Operator's Manual page 154

Scan tuning
Starting scan tuning
Select desired frequency band.
Press 2 button.
will appear in the display. The ra-
SC
dio briefly tunes in all receivable
stations on the band selected. The
first scan cycle will tune in only the
stations with a strong signal. The
second scan cycle will tune in every
receivable station.
Ending scan tuning
Press 2 button or d, c,
f or e button.
SC disappears from the display.
Manual station memory (Presets)
You can store ten AM and ten FM stations.
Storing stations
Tune in the desired station.
Press and hold desired station
button 4 to M until a brief
signal tone is heard.
The frequency is stored on the
selected station button.
The frequency band and station
button number are shown in the up-
per left-hand corner of the display.
Retrieving a station from memory
Press desired station button 4
to M.
Controls in detail
Audio system
Automatic station memory (Autostore)
The Autostore memory function provides
an additional memory level. The station
memory for manually stored stations is not
overwritten.
Calling up Autostore memory level
Briefly press the key.
AS
AS is highlighted in the display.
The radio finds the ten stations with
the strongest signals. These
stations are stored on the station
buttons 4 to M in order of
signal strength.
Retrieving a station from memory
Press desired station button 4
to M.
Leaving the Autostore memory level
Press the AS key.
The highlighted AS in the display
disappears.
153