Table of Contents
Advertisement
Removing
Press mark on cover 1.
Cover 1 springs open at the top right
corner.
Pull at the protruding part of cover 1
and fold cover down to reveal the
threaded hole for the towing eye bolt.
Do not disconnect cover 1 from its
check strap.
Screw towing eye bolt in to its end stop
and tighten with lug wrench.
Installing
Unscrew the towing eye bolt using the
lug wrench.
To reinstall cover 1, tilt the marked
lower left corner towards the opening.
Maintaining its tilted position, insert
cover 1 by applying the latches at the
top left and lower right corner into the
opening.
To close cover 1, press on the diago-
nal opposite side of the marked corner
until it fully engages.
i
Make sure the cover's check strap does not
get caught when closing.
Practical hints
Towing the vehicle
Rear cover
Example illustration (AMG vehicles and
vehicles with Sport Package* have a square
cover)
1 Cover in rear bumper
423
Advertisement
Table of Contents
