Table of Contents
Advertisement
Switching on the telephone
Switching on the telephone
Press h button.
If you have programmed an unlock
code for the telephone, you must now
enter the code.
Enter code using buttons 1
to R.
If necessary, correct number entered
with the
CLR
soft key. Press soft key
briefly to delete the last digit entered;
press soft key and hold to delete the
complete number.
Press
OK
soft key after entering correct
code.
The telephone is unlocked. If you have
entered an incorrect code, you must
enter the correct code.
Switching off the telephone
Press h button for approximately
3 seconds.
PROCESSING
appears in the display until
the telephone is off. Afterward,
PHONE OFF
appears in the display.
Adjusting the volume
E
Turn rotary control of
a telephone call.
The volume will increase or decrease
depending on the direction turned.
i
The volume can be adjusted separately for
telephone mode and audio mode.
Adjusting sound
Adjust sound during a telephone call.
Sound adjustment see "Adjusting
sound functions" ( page 197).
Placing a call
Entering a telephone number and
starting the dialing process
button during
Enter desired telephone number using
buttons 1 to R.
The number can have up to 32 digits,
but only twelve of these are visible in
the display.
Controls in detail
Audio system
227
Advertisement
Table of Contents
