Asus DiGiMatrix AB-V10 User Manual page 96

Use the Change Mode menu
1. Right-click the Control Center
icon in the Windows taskbar to
display the right-click menus.
Select Change Mode.
2. Select Soft AP Mode when the
Change Mode window appears.
Click OK.
3. The Soft AP icon replaces the
Control Center utility icon in the
Windows
Other Soft AP settings
When in Soft AP mode, two additional tabbed property sheets are added to
the Status settings of the Wireless Settings utility.
MAC Table
The MAC Table tab displays the MAC
address of a wireless device
connected to the soft AP.
AID - shows the Association ID of a
wireless device connected to the soft
AP.
Power Saving Mode - displays the
Power Saving Mode used by the
wireless device connected to the soft
AP.
3-64
®
taskbar.
Chapter 3: Starting up