8.
Secure the metal cover with screws that you removed earlier.
2.5 Installing a CPU
The P4SQ motherboard comes with a surface mount 478-pin Zero
Insertion Force (ZIF) socket. This socket is specifically designed for
®
®
Intel
Pentium
To install a CPU:
1.
Loosen the CPU fan screws.
2.
Disconnect the CPU fan cable from the CPU fan connector on the
motherboard.
3.
Lift the CPU fan.
The DiGiMatrix system comes with a pre-installed proprietary CPU fan and
heatsink assembly. Do not replace the CPU fan with other models.
2-6
4/Celeron processor.
3
2
8
1
Chapter 2: Basic Installation