Timer And Sleep Operation (Remote Control Only) - Pioneer X-HM20V-s Operation Manual

Timer and sleep operation (Remote control only)

STANDBY/ON
PRESET
Timer playback:
The unit turns on and plays the desired source (DISC,
Tuner, USB Audio, USB Video, iPod, Line In) at a preset
time.
This unit has 2 types of timer: ONCE TIMER and
DAILY TIMER.
Once timer:
Once timer play works for one time only at a preset time.
(" " indicator).
Daily timer:
Daily timer play works at the same preset time every day
that we set. For example, set the timer as a wake-up call
every morning.
("DAILY" indicator).
Using the once timer and daily timer in combination:
For example, use the once timer to listen to a radio
programme, and use the daily timer to wake up.
1 Set the daily timer (page 37 - 38).
2 Set the once timer (page 37 - 38).
1 minute or more
Daily timer
Stop
Start
n Timer playback
Before setting timer:
Check that the clock is set to the correct time (refer
l
to page 18). If it is not set, you cannot use the timer
function.
For timer playback: Plug in USB or load discs or dock
l
iPod to be played.
1 Press the STANDBY/ON button to turn the power on.
2 Press and hold the CLOCK/TIMER button.
3 Within 30 seconds, press the
"Once" or "Daily", and press the ENTER button.
4 Within 30 seconds, press the
"Timer set", and press the ENTER button.
CLOCK/TIMER SLEEP
MEMORY/FOLDER
+
PRESET
DVD/CD
ENTER
Once timer
Start Stop
or button to select
or button to select
5 To select the timer playback source (DISC, Tuner, USB
Audio, USB Video, iPod, Line In), press the PRESET +
or – button. Press the ENTER button.
When you select the tuner, select a station by pressing
the or button, and then press the ENTER
button. If a station has not been programmed, "No
Preset" will be displayed and timer setting will be
cancelled.
6 To adjust the day, press the
press the ENTER button.
7 Press the ENTER button to adjust the hour. Press the
the or button and then press the ENTER button.
8 To adjust the minutes, press the the
and then press the ENTER button.
9 Set the time to finish as in steps 7 and 8 above.
10 Adjust the volume using the VOL + or – button, and then
press the ENTER button. Do not turn the volume up too
high.
11 Press the STANDBY/ON button to enter the power
stand-by mode. The "TIMER" indicator lights up and the
unit is ready for timer playback.
12 When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the
preset volume. The timer indicator will blink during timer
playback.
13 When the timer end time is reached, the system will
enter the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer operates at the same time every day. It will
continue until the daily timer setting is cancelled. Cancel
the daily timer when it is not in use.
Notes:
When performing timer playback using external unit
l
connected to the USB terminal or LINE IN connector,
select related source in step 5.
This unit will turn on or enter the power stand-by mode
l
automatically. However, the connected unit will not turn
on or off. To stop the timer playback, follow step
"Cancelling the timer setting" of page 38.
En-37
or button and then
or button