Table of Contents
Advertisement
Extending gear range
Briefly pull right shift paddle 2.
The transmission will shift to the next
higher gear as permitted by the shift
program. This action simultaneously
extends the gear range of the transmis-
sion.
i
If you press on the accelerator when the en-
gine has reached its rpm limit, the transmission
will upshift beyond any gear range limit selected.
Canceling gear range limit
Pull and hold right shift paddle 2
until
D
reappears in the multifunction
display ( page 173).
The transmission will shift from the
current gear range directly to gear
range D.
Shifting into optimal gear range
Pull and hold left shift paddle 1.
The transmission will automatically
select the gear range suited for optimal
acceleration and deceleration. This will
involve shifting down one or more
gears.
Controls in detail
Automatic transmission
Manual shift program CLS 63 AMG
In addition to the automatic shift
program C or S, your vehicle is equipped
with the manual shift program M.
In the manual program mode M,
system-controlled automatic gearshifting
is switched off and you need to change the
gears by manually upshifting or downshift-
ing using the steering wheel gearshift
paddles ( page 180) or the gear selector
lever.
!
Allow engine to warm up under low load use.
Do not place full load on the engine until the
operating temperature has been reached.
Shift into reverse gear R or park position P only
when the vehicle is stopped.
Avoid spinning of a drive wheel for an extended
period when driving off on slippery road
surfaces. This may cause serious damage to the
drivetrain which is not covered by the
Mercedes-Benz Limited Warranty.
181
Advertisement
Table of Contents
