Gear Selector Lever Position - Mercedes-Benz 2005 E -Class Wagon Operator's Manual

E-class wagon
Table of Contents

Advertisement

Gear selector lever position

Effect
ì
Park position
Gear selector lever position
when the vehicle is parked. Place
gear selector lever in position P
only when vehicle is stopped.
The park position is not intended
to serve as a brake when the
vehicle is parked. Rather, the
driver should always set the
parking brake in addition to
placing the gear selector lever in
position P to secure the vehicle.
Effect
The SmartKey can only be
removed from the starter switch
with the gear selector lever in
position P. With the SmartKey
removed, the gear selector lever
is locked in position P.
If the vehicle's electrical system
is malfunctioning, the gear
selector lever could remain
locked in position P
( page 405).
í
Reverse gear
Place gear selector lever in
position R only when vehicle is
stopped.
Controls in detail
Automatic transmission
Effect
ë
Neutral
No power is transmitted from the
engine to the drive axle. When
the brakes are released, the
vehicle can be moved freely
(pushed or towed).
To avoid damage to the trans-
mission, never engage N while
driving.
If the ESP is deactivated or
malfunctioning:
Move gear selector lever to N
only if the vehicle is in danger of
skidding, e.g. on icy roads.
ê
Drive
The transmission shifts
automatically. All forward gears
are available.
187

Advertisement

Table of Contents
loading

This manual is also suitable for:

E 320E 500 4matic2003 c 320 4matic

Table of Contents