Mercedes-Benz 2005 C 230 Kompressor Sport Operator's Manual page 113

Head restraint tilt (rear outer seats)
Two different head restraint angle
positions are available:
Press the release button ( page 110)
and tilt the head restraint to the
desired position.
Removing and installing rear seat head
restraints (rear outer seats)
i
Adjust the head restraint in such a way
that it is as close to the head as
possible.
i
The rear center seat head restraint
cannot be removed.
Warning!
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the center of
the head restraint supports the back of the
head at eye level. This will reduce the poten-
tial for injury to the head and neck in the
event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
Do not interchange head restraints from
front and rear seat.
Controls in detail
G
1 Release button
Removing rear seat head restraints
Fold back head restraint ( page 110).
Pull head restraint to its highest
position.
Push release button 1 and pull out
head restraint.
Installing rear seat head restraints
Insert head restraint and push it down
until it engages.
Push button 1 and adjust head
restraint to desired position.
Seats
111