Mercedes-Benz 2004 E-Class OCS Operator's Manual page 242

1 Seat cushion
2 Seat backrest
Grip the back of seat cushion 1 and
fold forward.
Push the rear seat head restraints all
the way in.
i
If the rear center seat is to be occupied
while driving, it may be necessary to
fold the seat belt buckle up again.
Pull the handle in the trunk.
The seat backrest is released and the
head restraints fold back.
Fold the seat backrest forward.
!
Make sure the head restraints fit all the
way into the seat cushion pockets. This
will prevent the backrests from being
damaged during loading.
Controls in detail
Returning seat backrest to original po-
sition
1 Seat cushion
2 Seat backrest
Swing seat backrest 2 to the rear until
it engages.
Swing seat cushion 1 to the rear and
press the center front of the cushion
until it audibly engages.
Loading
241