Memory Function - Mercedes-Benz 2004 E-Class OCS Operator's Manual

Memory function

!
Prior to operating the vehicle, the driv-
er should check and adjust the seat
height, seat position fore and aft, and
seat backrest angle if necessary, to
ensure adequate control, reach and
comfort. The head restraint should also
be adjusted for proper height. See also
the section on air bags ( page 57) for
more information on proper seat posi-
tioning.
In addition, adjust the steering wheel to
ensure adequate control, reach, opera-
tion and comfort. Both the interior and
outside rear view mirrors should be ad-
justed for adequate rear vision.
Fasten seat belts. Infants and small
children should be seated in a properly
secured restraint system that complies
with U.S. Federal Motor Vehicle Safety
Standards 213 and 225 and Canadian
Motor Vehicle Safety Standards 213
and 210.2.
You can store up to three different settings
per SmartKey.
The following settings are saved for each
stored position:
Driver's seat and backrest position
Steering wheel position
Driver's side exterior rear view mirror
position
Passenger side exterior rear view mir-
ror position
Front passenger seat position
These SmartKey-dependent memory set-
tings can be deactivated if desired
( page 156).
Controls in detail
Memory function
Warning!
Do not activate the memory function while
driving. Activating the memory function
while driving could cause the driver to lose
control of the vehicle.
G
121