Mercedes-Benz 2004 CLK-Class Cabriolets Operator's Manual page 354

Practical hints
Opening/closing in an emergency
2 Hex wrench
Insert long side of hex wrench 2 into
opening.
Using hex wrench 2, press release
catch down in direction of arrow.
The roll bar extends with a loud sound.
Repeat this step for the second roll bar.
Have the systems checked at your autho-
rized Mercedes-Benz Center as soon as
possible.
354
Lowering roll bars manually
You can lower the roll bars manually after
they have been released.
i
The rear head restraints cannot be low-
ered and the soft top cannot be opened
or closed when the roll bars have been
released.
Warning!
Never lower the roll bars manually unless
the soft top is open. Otherwise, the roll bars
function could be impaired, no longer reduc-
ing your risk of injury in an optimal manner.
Contact your authorized Mercedes-Benz
Center to have the roll bar lowered when the
soft top is closed.
1 Orientation seam
G
2 Hex wrench
3 Press wrench down
4 Press head restraint down
Take hex wrench out of the
Mercedes-Benz vehicle literature
pouch.
Align hex wrench so that its long side is
parallel to orientation seam 1 and in-
sert hex wrench 2 into gap on left side
of respective head restraint.
Press hex wrench down firmly in direc-
tion of arrow 3 and hold.