Mercedes-Benz 2003 SL 500 Operator's Manual page 304

Practical hints
Flat tire
1 Valve stem
2 Valve stem tool
3 TIREFIT container
4 Filler hose
5 Filler hose plug
6 Tire valve core
Unscrew the valve cap from valve 1.
304
Remove tire valve core 6 from valve
stem 1 using valve stem tool 2. Keep
tire valve 6 clean and dry.
Remove plug 5 from end of hose 4.
Push hose 4 onto valve stem 1.
Hold TIREFIT container 3 upside down
(hose down) and squeeze firmly several
times until entire contents of the con-
tainer are in tire.
Pull hose 4 off and screw tire valve 6
tightly into the valve stem 1 using the
valve stem tool 2.
i
If the removed tire valve core is dirty,
use the spare tire valve core stored
with the valve stem tool.
Reinstall valve cap on valve stem 1.
Install plug 5 onto end of hose 4.
i
If sealant has leaked out, let it dry. You
can then peel it off.