Mercedes-Benz 2003 M-Class Operator's Manual page 135

Opening the windows
Press switch k to resistance point.
The window will move downwards until
you release the switch.
Closing the windows
Press switch j to resistance point.
The window will move upwards until
you release the switch.
Fully opening the windows
Press switch k past the point of re-
sistance and release.
Fully closing the windows
Press switch j past the point of re-
sistance and release.
!
If the side window is blocked in the up-
per area, the closing process is inter-
rupted and the window reopens
slightly.
Remove the obstruction, press switch
j past the point of resistance again
and release.
If the window still does not close
without an object having been trapped,
then hold the j switch down. The
side window will then close without the
obstruction sensor function.
Controls in detail
Power windows
i
If the driver's window cannot be auto-
matically closed without an object
having been trapped, press the j
switch past the point of resistance
again within five seconds and release.
The side windows will now close with-
out the obstruction sensor function.
Warning!
When closing the windows, make sure that
there is no danger of anyone being harmed
by the closing procedure.
Stopping the windows
Briefly press switch k or j .
G
135