Canon MG7500 series Online Manual page 723

• If you cannot see the jammed paper at the paper output slot:
If you cannot see the jammed paper at the paper output slot, remove the paper following the
procedure below.
1. Detach the rear cover.
Pull out the rear cover.
2. Detach the transport unit cover.
Lift up the transport unit cover, then pull it out.
3. Pull out the paper slowly.
Note
• Do not touch the inner parts of the machine.
4. Attach the transport unit cover.
Insert the transport unit cover to the back of the machine.
5. Attach the rear cover.
Insert the rear cover to the back of the machine.
723