BMW F 800 GT Rider's Manual page 110

Replacing the brake light
8
and rear light bulbs
with LED rear light
108
The LED rear light can be
replaced only as a complete
unit. Consult a specialist work-
shop, preferably an authorised
BMW Motorrad dealer.
without LED rear light
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
z
Switch off the ignition.
Remove screws 1.
Pull the bulb housing to the
rear to remove.
OA
OA
Press bulb 1 into its socket
and turn it counter-clockwise to
remove.
Replace the defective bulb.
Bulb for tail light/brake
light
P21/5W / 12 V / 5 W / 21 W
Use a clean, dry cloth to hold
the new bulb in order to keep
the glass free of foreign matter.
Press bulb 1 into its socket
and turn it clockwise to install.
Hold the bulb housing in posi-
tion and install screws 1.