8
100
Slip spacing bushing 1 into
the wheel hub on the left-hand
side.
z
ATTENTION
Front wheel installed wrong
way round.
Risk of accident
Note direction-of-rotation ar-
rows on tyre or rim.
Roll the front wheel between
the front wheel suspension
(telescopic forks).
Raise the front wheel, insert
quick-release axle 2 and
tighten to specified torque.
Quick-release axle in
telescopic forks
50 Nm
Tighten axle clamping screws 1
to the specified tightening
torque.
Clamp of quick-release
axle
Tightening sequence: Tighten
screws six times in alternate
sequence
19 Nm
Removing the front-wheel
stand.
without centre stand
OE
Remove the auxiliary stand.
Ease the brake calipers on to
the brake discs.