06 Locks and alarm
Alarm indicator
The status of the alarm system is indicated by
the red indicator light on the dashboard (see
illustration):
•
Indicator light off: the alarm is not
armed (p. 170)
•
The indicator light flashes at one-second
intervals: the alarm is armed
06
•
The indicator light flashes rapidly before
the remote key is inserted in the ignition
slot and the ignition is put in mode I: the
alarm has been triggered.
Related information
•
Alarm – general information (p. 169)
•
Alarm – turning off (p. 171)
•
Alarm signal (p. 171)
170
Alarm – arming/disarming
The alarm system provides a warning if an
attempt is made to break into the vehicle.
Arming the alarm
–
Press the Lock button on the remote key.
One long flash of the turn signals will con-
firm that the alarm (p. 169) is armed.
Alarm confirmation settings can be changed
in MY CAR, under
Car settings
settings
Keyless
entry. For a description
of the menu system, see My Car – introduc-
tion (p. 76).
USA FCC ID: MAYDA 5823(3)
This device complies with part 15 of the FCC
rules. Operation is subject to the following
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired opera-
tion.
Canada IC: 4405A-DA 5823(3)
This device is subject to the following condi-
tions: (1) this device may not cause interfer-
ence, and (2) this device must accept any
interference, including interference that may
cause undesired operation of the device.
I n f o r ma t i o n P r o v i d e d b y :
Disarming the alarm
–
Press the Unlock button on the remote
key.
> Two short flashes from the car's direc-
tion indicators confirm that the alarm
has been deactivated and that all
doors are unlocked.
Related information
•
Alarm indicator (p. 170)
Lock
•
Alarm signal (p. 171)
•
Alarm – turning off (p. 171)
•
Alarm-related functions (p. 171)