Table of Contents
Advertisement
Setup
Spraying Stains or Clear Coats
(Fine-Finish Optimizer)
The Fine-Finish Optimizer should be installed and used
when spraying thin material such as stain or clear coats.
The Fine-Finish Optimizer restricts the material flow result-
ing in a finer quality finish.
NOTICE
Failure to install the Fine-Finish Optimizer when spraying
thin materials will cause the sprayer to pulsate.
Installation
1. Remove material cup and suction tube.
2. Remove the cleaning tool before installing the
Fine-Finish Optimizer into the sprayer.
3A0885E
ti15440a
3. Push Fine-Finish Optimizer into pump inlet until
completely engaged and re-install suction tube.
ti15473a
Cleanup/Storage
Be sure to remove and clean the Fine-Finish Optimizer
immediately after use. Store the Fine-Finish Optimizer
on the Storage/cleaning Tool supplied to keep the hole
clear of dried material.
ti15480a
9
Advertisement
Table of Contents
