Engine Cleaning; Vehicle Washing; Plastic And Rubber Parts - Mercedes-Benz 2000 CLK 430 Operator's Manual

Scratches, corrosive deposits, corrosion or damage due
to negligent or incorrect care cannot always be removed
or repaired with the car-care products recommended
here. In such cases it is best to seek aid at your
authorized Mercedes-Benz Center.
The following topics deal with the cleaning and care of
your vehicle and give important "how-to" information as
well as references to Mercedes-Benz approved car-care
products.
Additional information can be found in the booklet titled
"Vehicle Care Guide".

Engine cleaning

Prior to cleaning the engine compartment make sure to
protect electrical components and connectors from the
intrusion of water and cleaning agents.
Corrosion protection, such as MB Anticorrosion Wax
should be applied to the engine compartment after
every engine cleaning. Before applying, all control
linkage bushings and joints should be lubricated. The
poly-V-belt and all pulleys should be protected from any
wax.
Cleaning and care of the vehicle
Instruments
Operation
and controls
Instrument
Driving
cluster display

Vehicle washing

Do not use hot water or wash your vehicle in direct
sunlight. Use only a mild car wash detergent, such as
Mercedes-Benz approved Car Shampoo.
Thoroughly spray the vehicle with a diffused jet of
water. Direct only a very weak spray towards the
ventilation intake. Use plenty of water and rinse the
sponge and chamois frequently.
Rinse with clear water and thoroughly wipe dry with a
chamois. Do not allow cleaning agents to dry on the
finish.
In the winter, thoroughly remove all traces of road salt
as soon as possible.
When washing the underbody, do not forget to clean the
inner sides of the wheels.

Plastic and rubber parts

Do not use oil or wax on these parts.
Practical hints Car care
273
Technical
Index
data