MANUAL CLOCK SETTING
You must set the date and time manually for Timer
Recordings, ON/OFF Timer and Daylight Saving Time
if the Auto Clock process did not set them correctly.
EXAMPLE: Setting the clock to "8:30 AM", 29th (FRI)
March, 2002.
1
Press the MENU button.
Press the SET/TRACKING + or –
button to select the SYSTEM
SET-UP option, then press the
ENTER button.
2
Press the SET/TRACKING + or –
button to select the CLOCK SET
option, then press the ENTER
button.
3
Press the SET/TRACKING + or –
button to set the month, then press
the ENTER button.
4
Set the day, year and time as in
step 3.
After setting the clock, time and date,
the time starts functioning automati-
cally.
•
NOTES:
After a power failure or disconnection of the
power plug, the time display will be lost. In
this case, set the present time again if the
Auto Clock did not set correctly.
•
To move cursor backward, press the CANCEL
button.
5A30301A E P12-19
TV OPERATION
1
To turn on the TV/VCR, press the POWER button.
2
Adjust the volume level by
pressing the VOLUME Up or Down
button. The volume level will be
indicated on the screen by green
bars. As the volume level
M E N U
increases, so do the number of
TIMER REC SET
TV SET-UP
bars. If the volume decreases, the number of green
CH SET-UP
AUTO REPEAT ON OFF
bars also decreases.
SYSTEM SET-UP
3
Set the TV/CATV menu option to the appropriate
+/–/ENTER/MENU
position (See page 15).
SYSTEM SET-UP
TV
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
CATV - CABLE TV Channels
AUTO CLOCK
ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
VHF/UHF/CATV CHANNELS
+/–/ENTER/MENU
CLOCK SET
MONTH
3
DAY
1 (WED)
YEAR
2000
12 : 00 AM
TIME
+/–/ENTER/CANCEL/MENU
CLOCK SET
MONTH
3
DAY
29 (FRI)
4
YEAR
2002
Press the Direct Channel selection buttons to select
8 : 30 AM
TIME
the channel.
+/–/ENTER/CANCEL/MENU
• TV mode direct channel selection
When the TV/CATV menu option is in the TV
position, all channels can be instantly selected by
8 : 30 AM FRI
using two buttons (for example, to select channel 2,
press "0", then "2". If you press only "2", channel
selection will be delayed for a few seconds). For
channels 10 and above, press the 2 digits in order.
• CATV mode direct channel selection
When the TV/CATV menu option is in the CATV
position, channels can be selected as follows:
• TO SELECT CATV CHANNELS:
1-9
10-12
13-99
100-125 Press the 3 digits in order.
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed,
the corresponding channel will be
selected in 2 seconds.
NOTES:
13
- VHF/UHF Channels
TV
CATV
VHF
VHF
2-13
2-13
UHF
STD/HRC/IRC
14-69
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100)(125)
01 (5A)
Press "0" twice, then 1-9 as needed.
Example, to select channel 2, press "002".
Press "0", then the remaining 2 digits.
Example, to select channel 12, press "012".
Press the 2 digits in order.
Example, to select channel 36, press "36".
Example, to select channel 120, press "120".
•
If a channel with no broadcast is selected,
the sound will automatically be muted.
•
If a station being viewed stops broadcasting,
the TV will automatically shut itself off after
15 minutes.
04/10/2001, 18:01
VOLUME
32
CH 012
13