Calling Another Party; Monitoring The Channel - Memorex MK1996 User Manual

MK1996.OM.QXD 5/19/03

CALLING ANOTHER PARTY

To alert another party that you wish to communicate with them, perform the following:
1
1
Press the FUNC button
select a desired channel using the
CHANNEL/VOLUME Up
buttons. Press the FUNC button
again to confirm the channel.
NOTES:
• Note that both the calling and receiving units must be on the same main
channel and sub-channel for the call function to work.
• When the CALL button is pressed, the Signal Strength indicators will appear
in the display.

MONITORING THE CHANNEL

This feature is used for listening to weak signals or to hear all activities on the
channel by manually overriding the channel sub-tone code setting as follows:
1
To activate, press and hold the
Monitor button for two seconds; the
Monitor indicator will appear.
12:03 PM Page 11
OPERATION (CONTINUED)
2
2
, then Press the CALL button once and wait
for the party's response.
or Down
2
To disable and return to normal
operation, press the Monitor button
again for two seconds; the Monitor
indicator will disappear.
11