Specifications - Krell Industries Foundation Processor Owner's Reference Manual

Specifications

SIGNAL-TO-NOISE RATIO
TOTAL HARMONIC DISTORTION (THD)
INPUTS
OUTPUTS
CONTROL/UPDATE
Foundation Processor
"A" Weighted 106 dB
Unweighted 20 Hz-20 kHz, +0, - 0.003 dB
ANALOG AUDIO (1) Pair Balanced via XLR connectors
(4) Pairs Single-ended via RCA connectors
DIGITAL AUDIO (10) HDMI via HDMI connectors (9 on rear, 1 on front)
(3) EIAJ optical via Toslink connectors
(3) Coaxial via RCA connectors
DIGITAL VIDEO (10) HDMI via HDMI connectors (9 on rear, 1 on front)
ANALOG VIDEO (3) Component Video via RCA connectors
(2) Composite Video via RCA connectors
(9) Balanced via XLR Connectors
ANALOG AUDIO
(9) Single-ended via RCA Connectors
(1) Zone 2 Output
(2) Single-ended via RCA Connectors
DIGITAL AUDIO (1) EIAJ optical via TosLink connector
(1) Coaxial via RCA connector
(2) HDMI via HDMI connector
DIGITAL VIDEO
(1) IR Receiver for Remote Control
(1) RS-232 via DB9 Female Connector Straight Wired
(1) RC-5 via 1/8" stereo "trs" Receptacle
(1) Ethernet via RJ-45 Connector
(1) Mini USB used for firmware updates
(1) 12vdc Remote Trigger Input via 1/8"
(1) 12vdc Remote Trigger Outpuys via 1/8"
R, L, C, SR, SL,SBR, SBL, S1, S2
R, L, C, SR, SL, SBR, SBL, S1, S2
Both Include Audio Return Channel
Mono Receptacle
Output
Mono Receptacles
25