Chapter 2 Hardware Installation; How To Install The Router - Tenda W150M User Manual

WPS feature will be enabled and WPS indicator
will be shown blinking. Press this button for 7
seconds, the settings configured in this device will
be deleted and it will restore the settings to the
default one.
Ø
Power: The port is for USB line connection.
Please use the included USB line connected with
the power adapter or the USB port of computer.
Ø
LAN/WAN: The 100Mbps Ethernet port, in
Wireless Router mode, it is a WAN access port to
connect the DSL, MODEM generally. While in
AP, WISP mode, Client+AP mode, WDS+AP
mode, WISP Router mode, it is a LAN port to
connect the PC, Router, and Ethernet Switch.

Chapter 2 Hardware Installation

2.1 How to Install the Router

After you unpack the box, please follow the steps below to
connect the device. For better wireless performance, please
put the device in the middle of wireless coverage area.
Portable Wireless AP/Router