Troubleshooting - Fisher & Paykel RS60RDWX1 Installation Instructions And User Manual

If there is a problem with your Wine Cabinet, please check the following points before
contacting your local Fisher & Paykel Authorised Repairer or Customer Care Centre.
Product parts and accessories can be purchased through Fisher & Paykel Customer Care
or online at www.fisherpaykel.com (this service is available to selected markets only).
PROBLEM
Appliance does
not operate.
Lights do not
illuminate
when the door
is opened.
Motor operates for
long periods.
Wine bottles
appear too warm.
Wine bottles
appear too cold.

TROUBLESHOOTING

POSSIBLE CAUSES
Cabinet is in Standby
mode.
No electricity at the
power outlet.
Cabinet is not working.
Lights not functioning.
The room temperature is
hotter than normal.
Prolonged or frequent
door openings.
Large amount of wine
bottles added.
Temperature setting is too
low.
Door not sealed properly.
Temperature setting not
correct.
Prolonged or frequent
door openings.
Large amount of wine
bottles added.
Temperature setting not
correct.
wHAT TO DO
Refer to 'Operating instructions –
Special functions' section.
Check the cabinet is correctly
connected and the power is
switched on.
Check another appliance at the same
outlet.
Check the house fuse.
Check the cabinet is turned on at the
wall.
The LED lights cannot be service by
the user. Contact your Fisher & Paykel
Dealer or Fisher & Paykel Authorised
Repairer.
Minimise door openings to allow
temperature to stabilise.
Refer to 'Operating instructions'
and 'Storing your wine' sections for
optimal temperature settings.
Check the cabinet is level and gasket
seals are clean.
Adjust the temperature control to a
colder setting. Refer to the 'Operating
instructions' sections.
Minimise door openings to allow
temperature to stabilise.
Allow time for recently added
wine bottles to reach the desired
temperature.
Adjust the temperature control to a
warmer setting. Refer to 'Operating
instructions' sections.
21