Asus P5AD2-E Deluxe Owner's Manual page 142

Viewing your RAID configuration Viewing your RAID configuration
Viewing your RAID configuration Viewing your RAID configuration Viewing your RAID configuration
This option allows you to view the system RAID configuration and RAID
resources. You can also enable or disable the Auto-Rebuild function from
this menu.
To view your RAID configuration:
1. Press <5> from utility main menu. The following screen appears.
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
Channel 0
Channel 1
Channel
ID
Pri/D0
Pri/D1
Sec/D0
Sec/D1
: Capacity (GB)
[ , ,Space] Change Option
2. View your RAID configuration from this menu, then press <Esc> to
exit the utility.
To enable/disable the Auto-Rebuild feature:
1. Use the left/right arrow keys or the space bar to enable or disable
A u t o - R e b u i l d A u t o - R e b u i l d
the A u t o - R e b u i l d A u t o - R e b u i l d item. A u t o - R e b u i l d
2. Press <Esc> to exit the utility.
5 - 2 8 5 - 2 8
5 - 2 8 5 - 2 8 5 - 2 8
[ RAID Card Configuration ]
Auto-Rebuild:
[ RAID Card Resource ]
Interrupt: B
Interrupt: B
[ Drive Status ]
Drive Name
XXXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXXXXXXXXXXXXX
Enable
I/P Port: 0000AC00
I/P Port: 0000A800
Size
(MB) Array No
XXXXXX Array 0
XXXXXX Array 0
XXXXXX Array 0
XXXXXX Array 0
Drive Mode: P = PIO, D = DMA, U = UDMA
C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t
Drive
Mode
U5
U2
U4
U6
[ESC] Exit