Asus P5AD2-E Deluxe Owner's Manual page 141

Rebuilding a RAID array Rebuilding a RAID array
Rebuilding a RAID array Rebuilding a RAID array Rebuilding a RAID array
This option allows you to rebuild an existing RAID set. This option only
applies to RAID 1 (Mirrored) or RAID 0+1(Striped+Mirrored) sets.
To rebuild a RAID 1 or 0+1 set:
1. Press <4> from utility main menu. The following screen appears.
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
Array No
Array 0
Array 1
Array 2
Array 3
: Capacity (GB)
[ ] Up
2. Use the up or down arrow keys to select a RAID array, then press
<Enter> to rebuild. The following screen appears.
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
Channel ID
Pri/D1
Channel ID
Sec/D1
Channel ID
Pri/D1
Sec/D1
: Capacity (GB)
[ ] Up
3. Press the up/down arrow keys to select the drive you want to rebuild,
then press <Enter>.
4. Follow succeeding screen instructions to continue.
A S U S P 5 A D 2 - E D e l u x e A S U S P 5 A D 2 - E D e l u x e
A S U S P 5 A D 2 - E D e l u x e A S U S P 5 A D 2 - E D e l u x e A S U S P 5 A D 2 - E D e l u x e
[ Rebuild RAID Menu ]
Array Mode Drive No
Stripe 4
Mirror 2
---- ----
---- ----
[ ] Down
[ Source Drive ]
Drive Name
XXXXXXXXXX
[ Target Drive ]
Drive Name
XXXXXXXXXX
[ Drive List]
Drive Name
XXXXXXXXXX
XXXXXXXXXX
[ ] Down
Size(MB)
XXXXXX Functional
XXXX Functional
-----
-----
: Bootable Array
[Enter] Select
Size (MB)
Size (MB)
Size (MB)
[Enter] Select
Status
-----
-----
[ESC] Exit
XXXXX
XXXXX
XXXXX
XXXXXX
[ESC] Exit
5 - 2 7 5 - 2 7
5 - 2 7 5 - 2 7 5 - 2 7