Power Sources - Memorex MPD8807CP User Manual

MPD8807.O/M.QXD 5/19/03
This CD player requires either two (2) "AA" cell standard batteries (not
included) or the AC adapter (not included).
BATTERY INSTALLATION
"Low Battery" will light in the display when
batteries are low (when using battery power).
1. Open the CD Compartment, then open the
battery compartment door by pressing in the
tab and lifting it. To prevent the possibility
of losing the cover, it cannot be removed.
2. Insert two (2) "AA" cell batteries (not included)
according to the polarity diagram inside the
battery compartment. Alkaline batteries are recommended for the
longest playing time.
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated next to
the battery compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Carbon-zinc and
Rechargeable) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to
prevent damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and
rupture. (Follow battery manufacturer's directions.)
AC OPERATION
To operate the unit using AC power, connect an AC adapter (not
included) to an AC outlet having 120V, 60Hz AC only. Plug the small end
into the DC 4.5V jack on the side of the unit and connect the other end
into the AC outlet. The batteries are automatically disconnected when the
AC adapter is used.
–
POLARITY:
7:54 AM Page 5

POWER SOURCES

BATTERY PRECAUTIONS
+
5