Previewing Image Being Received; Stopping Automatic Receiving - Furuno FAX-30 Operator's Manual

2. FAX OPERATION: NAVNET
2.1.2

Previewing image being received

To preview an image while it is being received, do the following:
1. At the fax standby display, press the WX FAX soft key.
2. Press the RCV WX FAX soft key.
Zone/Station/Channel
Image being
received
2.1.3

Stopping automatic receiving

You can stop automatic receiving at any time by doing the following:
1. At the standby display, press the WX FAX soft key.
2. Press the RCV WX FAX soft key.
3. Press the STOP RX soft key. The indication "RCV" is replaced with "STBY."
4. Press the RETURN soft key.
2-4
Frequency
IOC (288 or 576)
Speed (60, 90, 120, 180, 240)
Signal Strength (Range: 0-99, Typical: 30-70)
Signal-to-Noise Ratio (Range: 0-99, Typical: 20-60)
Facsimile receiving display
Receiving facsimile image
RECEIVE
WX FAX
CH
SETUP
TIMER
SETUP
START
RX
STOP
RX
RETURN