Table of Contents
Advertisement
5.1.3 Auxiliary Setup
1
2
Ref
Name
1
Enable
2
Name
3
Automatic ON/OFF time
4
Alarm
5
Dwell
5
4
3
Description
Enable Auxiliary outputs via the check box
output number.
An unchecked box indicates that the auxiliary output contact is disabled.
Field for naming the auxiliary output contact, up to 16 characters in length.
A schedule can be entered to automatically turn ON or OFF an enabled
auxiliary output contact.This eliminates manually enabling and disabling the
contact.The default time schedule is from 00:00 to 00:00.
Field assigning alarm input contacts (1–16) to individual auxiliary output
contacts. Multiple alarm input contacts can be assigned to individual auxiliary
outputs, by entering multiple alarm numbers separated by commas.
Example: To activate auxiliary output 1 while external alarms 2 and 3 are
activated, enter 2,3 in the Alarm field for auxiliary output 1.
Sets the time that the auxiliary output contact is active, to a maximum of
9999 seconds. Default is 0 seconds.
20
next to the auxiliary
Advertisement
Table of Contents
