Asus WIFI-AP P5E3 User Manual page 156

Intel Matrix Storage Manager Option ROM Utility
®
The Intel Matrix Storage Manager Option ROM utility allows you to create RAID 0,
®
RAID 1, RAID 10 (RAID 0+1), and RAID 5 set(s) from Serial ATA hard disk drives
that are connected to the Serial ATA connectors supported by the Southbridge.
To enter the Intel
1. Install all the Serial ATA hard disk drives.
2. Turn on the system.
3. During POST, press <Ctrl+I> to display the utility main menu.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH9R wRAID5
RAID Volumes:
None defined.
Physical Disks:
Port Drive Model
0 XXXXXXXXXXX
1 XXXXXXXXXXX
2 XXXXXXXXXXX
3 XXXXXXXXXXX
[↑↓]-Select
The navigation keys at the bottom of the screen allow you to move through
the menus and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and
may not exactly match the items on your screen.
5-44
® Application Accelerator RAID Option ROM utility:
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
[ DISK/VOLUME INFORMATION
Serial #
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
[ MAIN MENU ]
Size
XX.XXGB
XX.XXGB
XX.XXGB
XX.XXGB
[ESC]-Exit [ENTER]-Select Menu
]
Type/Status(Vol ID)
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Chapter 5: Software support