Table of Contents
Advertisement
8.8
About Cursor Key Which Points To "OFF" On Remote Control
When the ON/OFF button on the remote control is pressed, the cursor key which points to "OFF" will appear or
disappear to indicate the ON/OFF status of the air conditioner.
AUTO
STD
COOL
DRY
FAN
OFF
For some reason (Ex. The signal of the remote control does not reach the signal receiver of the indoor unit.), the
display of the remote control will not correspond with the actual ON/OFF status of the indoor unit:
1.
The air conditioner is running but the cursor key which points to "OFF" appears. The air conditioner can be
stopped with any button (Except for "ON/OFF", "TIMER SET", "TIMER ON") pressed.
The air conditioner is on standby, but the cursor key which points to "OFF" disappears. The air conditioner can
2.
be started with any button(Except for "ON/OFF", "TIMER SET", "TIMER OFF") pressed.
8.9.
Indoor Fan Motor Control
Automatic fan speed control
When automatic fan speed set, the available range for fan speed is from Hi to Slo.
Manual Fan Speed Control
Basic fan speed can be manually adjusted (Lo, Med, Hi) by using the fan speed selection button.
Basic Fan Speed
Category
Manual
Cooling Mode
Operation
Auto
Manual
Soft Dry
Operation
Auto
Manual
Heating Mode
Operation
Auto
8.10.
Auto restart control
If the operation is stopped due to a power failure u
un der the previous operation mode when the power supply is resumed.
FAN
AUTO
SPEED
PRESS "OFF/ON" BUTTON
AUTO
AIR
SWING
Hi
Me
AUTO
COOL
DRY
FAN
OFF
Lo-
SLo
SSLo
Lo
nder any operation mode
23
CS-PC9DKV / CU-PC9DKV / CS-PC12DKV / CU-PC12DKV
FAN
AUTO
SPEED
STD
AUTO
AIR
SWING
, it will restart automatically
Hide quick links:
Advertisement
Table of Contents
