Chase Installations - Heat & Glo HST-48D Owner's Manual

9

Chase Installations

A. Construct the Chase
Round Termination Cap
Metal Chase Top
Ceiling
Firestop
False Ceiling
Attic
Insulation
Tabs
Shield
Ceiling
Firestop
Insulation
Insulation
False Ceiling
False Ceiling
Chimney
Figure 9.1 Chase Assembly
32
Insulation in the
outside walls
of the chase
1. Chimney offset through exterior wall and
enclosed in chase.
2. Chase constructed on roof.
1
Figure 9.2 Chase Constructions
WARNING! You must install false ceilings and ceiling
restops at each oor of the chase or every
to control spread of re
WARNING! Risk of Fire! DO NOT seal area between re
stop opening and chimney pipe
chimney may cause re
WARNING! Risk of Fire!
in mm) air space clearance to insulation and other
materials surrounding the chimney system
nsulation and other materials must be rmly secured to
prevent accidental contact with chimney system
The chase must be properly blocked to prevent blown
insulation or other combustibles from entering and
making contact with replace or chimney
ailure to prevent contact between insulation or other
materials and chimney system may cause overheating
and re
2
ft
estricting air ow around
You must maintain a minimum
m)