To Memorize Channels - Disney DT1900-C User Manual

TO MEMORIZE CHANNELS

This TV is equipped with a channel memory feature which
allows channels to skip up or down to the next channel set
into memory, skipping over unwanted channels.
Before selecting channels, they must be programmed into
the TV's memory. In addition to normal VHF and UHF
channels, this TV can receive up to 113 Cable TV channels.
To use this TV with an antenna, set the TV/CABLE menu
option to the TV setting. When shipped from the factory, this
menu option is in the CABLE setting.
TV/CABLE SELECTION
1
Press the MENU button.
2
Press the or
select "CH SETUP", then press the
button.
3
Press the or
select "TV/CABLE".
4
Press the button to select "TV" or
"CABLE" mode. The arrow indicates
the selected mode.
5
Press the MENU button to return to normal TV viewing.
The chart below is typical of many cable system channel
allocations.
CABLE TV CHART
NOTE: Contact your cable company to determine the
type of cable system used in your area.
8
button to
button to
AUTOMATIC CHANNEL MEMORY
1
Press the MENU button.
2
Press the or
SETUP", then press the
3
Press the or
select "AUTO CH MEMORY", then
press the button. The TV will begin
memorizing all the channels available
in your area.
4
Press the MENU button to return to normal TV viewing.
TO ADD/DELETE CHANNELS
1
Press the MENU button.
2
Press the or
select "CH SETUP", then press the
button.
3
Press the or
select "ADD/DELETE", then press the
button.
4
Select the desired channels to be
added or deleted using the Direct
Channel Selection buttons (10 keys,
0-9) or the or
5
Press the or button to select ADD or DELETE.
If an unmemorized channel was selected (step 4), the
channel indication will be blue. Press the
you wish to ADD the unmemorized channel. The
channel indicator will change from blue to pink when a
channel is added and the channel will be memorized.
If a memorized channel was selected (step 4), the
channel indication will be pink.
Press the or button if you wish to
DELETE the channel from memory.
The channel indicator will change
from pink to blue when a channel is
deleted.
Repeat Steps 4 and 5 for each
channel to be added or deleted.
6
Press the MENU button after adding or deleting all of
the desired channels, to return to normal TV viewing.
to select "CH
button.
button to
button to
button to
button.
button if