Intended Use; Safety Instructions; Specific Safety Rules; General Power Tool Safety Warnings - Black & Decker BDCMTS-XE Original Instructions Manual

Table of Contents

Advertisement

Intended use

Your Black & Decker multi-purpose tool has been designed for a wide range of DIY applications.
Using the sander head, this tool is intended for sanding wood, metal, plastics and painted surfaces.
This tool is intended for consumer use only.

Safety instructions

General power tool safety warnings

:
To reduce the risk of injury, the user must read the instruction manual.
WARNING!
General power tool safety warnings
@
WARNING! Read all safety warnings and all
@
instructions listed below may result in electric
Read all safety warnings and all instructions provide with your power unit (BDCDMT108-XE,
WARNING!
BDCDMT180-XE)
WARNING: Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.

SPECIfIC SAfETy RULES

wARNING:
ALwAyS use safety glasses. Everyday eye glasses are NOT safety
glasses. Also use face or dust mas
CERTIfIED SAfETy EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CPA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NOSH/OSHA respiratory protection.
• Sanding of lead-based paint is not recommended. See Sanding Lead Based Paint for
additional information before sanding paint.
• Clean your tool out periodically.
SyMBOLS
The label on your tool may include the following symbols. The symbols and their definitions are as follows:
V ..................volts
Hz ................hertz
min ..............minutes
.............direct current
................Class I Construction
(grounded)
................Class II Construction
(double insulated)
............Read instruction manual before use
................Use proper eye protection
instructions.
before using this accessory.
k if
sanding operation is dust . ALwAyS wEAR
A ...................amperes
W ..................watts
................alternating current
n o .................no load speed
..................earthing terminal
................safety alert symbol
.../min or rpm...revolutions or
..................Use proper respiratory protection
..................Use proper hearing protection
(Original instructions)
Failure to follow the warnings and
y
reciprocation per minute
ENGLISH
3

Advertisement

Table of Contents
loading

Table of Contents