Connection And Preparation; Power Supply; Connecting To A Computer - Grundig MPaxx 928 Hydrox User Manual

6

CONNECTION AND PREPARATION

Power supply

The player operates with the integrated lithium-polymer battery 1 x 3.7 V,
120 mA.
Warning
Always use the device with the supplied USB adapter, otherwise the device
and the PC may be damaged. When you need a new USB adapter, please
consult GRUNDIG dealer or service center.
Make sure that the connecting socket for the earphones or the USB adapter
is dry before connecting the device to the computer. Otherwise the system
will not work correct.
Charging the battery
Charge the battery for the player on a computer.
You can also charge the battery by connecting it to a standard USB charger
using the USB adapter.
1 Connect the socket on the player to the USB socket on the computer or hi-fi
system using the USB adapter supplied or plug the charger lead into the USB
adapter of the player.
2 Switch on the computer or hi-fi or connect the charger to the power supply.
– The LED on the player flashes during the charging procedure. The charging
time is approximately two hours. When the battery is fully charged, the LED
lights up constantly.
Note:
The playing time is more than 7 hours when the player is fully charged.

Connecting to a computer

1
Switch on the computer.
2 Switch off the player.
3 Connect the socket on the player to the USB socket on the computer using
the USB adapter.
– A display appears on the computer screen as soon as the connection is
made.
----------