Ending Calls - BENQ-SIEMENS EF81 User Manual

Incoming calls during a call
You will hear a special tone during
the call (page 48). You have the
following options:
Accepting the waiting call in addition
to the first
Ý
Accept the waiting call.
Depending on your settings
(page 49) you can also accept
the waiting call by opening the
clamshell.
If the clamshell is closed, press
to swap between the calls.
Or (if the clamshell is open)
A
/ Accept the waiting call.
§Swap§
The current call is put on
hold.
To swap betweeen the two
calls when two connections are
established, always press
Rejecting the waiting call
µ
Press.
Or (if the clamshell is open)
Press.
§Reject§
Accepting the waiting call, ending the
current call
(Only if the clamshell is open)
B
End the current call.
C
Accept the new call.
‡
A
.

Ending calls

Clamshell closed
µ
Press. You return to the
held call.
Clamshell open
B
Press the End key briefly.
Or
Open menu and select
§Options§
Drop.
After the Return to held call?
you have the following options:
Accept the held call.
§Yes§
End the held call.
§No§
Conference
(Not during video calls)
Call up to 5 parties one by one and
link them together in a multiparty
call.
You cannot establish a conference when
the clamshell is closed.
When closing the clamshell you can con-
tinue an ongoing conference if you are in
handsfree mode (page 31).
Once a call has already been
established:
Open menu and select
§Options§
Hold
is put on hold.
J Dial a new number. When
the new connection is
established ...
Calling
display,
call. The current call
27
b