Toshiba RAS-5M34UAV-E1 Owner's Manual page 4

Toshiba split type air conditioners owner's manual
Hide thumbs Also See for RAS-5M34UAV-E1:
Table of Contents

Advertisement

Available languages

Available languages

1
INDOOR UNIT DISPLAY
4
5
1
2
3
6
2
PREPARATION BEFORE USE
Preparing Filters
1. Open the air inlet grille and remove the air ¿ lters.
2. Attach the ¿ lters. (see detail in the accessory sheet).
Loading Batteries (when use wireless operation.)
1. Remove the slide cover.
2. Insert 2 new batteries (AAA type)
following the (+) and (–) positions.
Clock Setup
1. Push
by tip of the pencil.
If timer indication is À ashing, go to the next step 2.
2. Press
or
: adjust the time.
3. Press
: Set the time.
Remote Control Reset
Push
by tip of the pencil or
1. Remove the batteries.
2. Press
.
3. Insert the batteries.
3
AIR FLOW DIRECTION
1
Press
: Move the louver in
the desired vertical direction.
2
Press
: Swing the air
automatically and press again to stop.
For horizontal direction, adjust
3
manually.
Note:
• Do not move the louver manually by others.
• The louver may automation positioning by some operation mode.
4
REMOTE CONTROL
1 Infrared signal emitter
2 Start/Stop button
3 Mode select button (MODE)
4 Temperature button (TEMP)
5 Fan speed button (FAN)
6 Swing louver button (SWING)
7 Set louver button (FIX)
8 On timer button (ON)
9 Off timer button (OFF)
! Setup button (SET)
" Clear button (CLR)
# Memory and Preset button (PRESET)
$ One-Touch button (ONE-TOUCH)
% High power button (Hi-POWER)
& Economy button (ECO)
( Quiet button (QUIET)
) Comfort sleep button (COMFORT SLEEP)
~ Filter reset button (FILTER)
+ Set clock button (CLOCK)
, Check button (CHECK)
- Reset button (RESET)
Note:
• The provided Remote Controller is a wireless type, which also can be
used as a wire. Please see "How to Connect The Remote Controller
for Wired Operation", located in installation instruction, in case of wired
control is required.
• In wire operation, remote controller will return to initial condition
(PRESET, TIMER and CLOCK will return to initial condition) when user
shutdown power supply of Air conditioner.
1 Hi POWER (Green)
2 FILTER (Orange)
3 PRE.DEF (Preheat/Defrost) (Orange)
4 TIMER (Yellow)
5 OPERATION (Green)
6 RESET button
1
#
2
3
7
$
&
8
)
,
+
5
ONE-TOUCH
Press the "ONE-TOUCH" button for fully automated operation that is
customized to the typical consumer preferences in your region of the world.
The customized settings control temperature air À ow strength, air À ow
direction and other settings to provide you alternate contact with "ONE-
TOUCH" of the button. If you prefer other settings you can select from the
many other operating functions of your Toshiba unit.
Press
: Start the operation.
6
AUTOMATIC OPERATION
To automatically select cooling or heating operation
1. Press
2. Press
3. Press
MED+
, or HIGH
7
COOLING / HEATING OPERATION
1. Press
2. Press
Cooling: Min. 17°C, Heating: Max. 30°C
3. Press
MED+
, or HIGH
8
DRY OPERATION
For dehumidi¿ cation, a moderate cooling performance is controlled
automatically.
1. Press
2. Press
9
Hi-POWER OPERATION
To automatically control room temperature and airÀ ow for faster cooling or
heating operation (except in DRY mode)
Press
: Start and stop the operation.
10
ECO OPERATION
To automatically control room to save energy (except in DRY mode)
Press
: Start and stop the operation.
Note: Cooling operation; the set temperature will increase automatically 1
degree/hour for 2 hours (maximum 2 degrees increase).
For heating operation the set temperature will decrease.
11
TEMPORARY OPERATION
4
In case of the misplaced or discharged remote control
• Pressing the RESET button, the unit can start or
5
stop without using the remote control.
6
• Operation mode is set on AUTOMATIC operation,
(
preset temperature is 25°C and fan operation is
%
automatic speed.
"
9
12
TIMER OPERATION
!
-
~
Set the timer when the air conditioner is operating.
Setting the ON Timer
1
Press
2
Press
3
Press
Daily timer allows the user to set both the ON & OFF timers and will be
activated on a daily basis.
: Select A.
: Set the desired temperature.
: Select AUTO, LOW , LOW+
.
: Select Cool
, or Heat
.
: Set the desired temperature.
: Select AUTO, LOW , LOW+
.
: Select Dry
.
: Set the desired temperature.
Setting the OFF Timer
: Set the desired ON
Press
timer.
: Set the timer.
Press
: Cancel the timer.
Press
, MED
,
, MED
,
: Set the desired
OFF timer.
: Set the timer.
: Cancel the timer.

Advertisement

Table of Contents
loading

Table of Contents