Memorex MPH6990 Owner's Manual page 51

UC374BH(MPH6990) OM ENG
Additional Information
Symptom
The answering system
does not work.
The answering system
does not answer calls.
Messages are incomplete.
After a power of failure,
the outgoing message
is deleted.
No sound on the base
unit speaker during
call monitoring or
message playback.
Cannot access remote
call-in features from
another touch-tone phone.
For additional set-up or operating assistance, please visit our WEBSITE at
www.memcorpinc.com or contact CUSTOMER SERVICE at 1-800-919-3647.
FOR PARTS AND ACCESSORIES, CONTACT FOX INT'L AT 1-800-321-6993.
50
6/5/02 8:57 AM Page 50
• Make sure the base unit is plugged in.
• Make sure the answering system is turned on.
• Set the record time to either the one minute or four
minute option.
• The memory may be full. Delete some or all of the
saved messages.
• The incoming messages may be too long. Remind
callers to leave a brief message.
• The memory may be full. Delete some or all of the
saved messages.
• Record your outgoing message again. The default
message should remain.
• Adjust the speaker volume on the base unit.
• Make sure you're using the correct PIN code.
• Make sure that the touch-tone phone you're using
can transmit the tone for at least two seconds. If it
cannot, you may have to use another phone to access
your messages.
(continued)
Suggestion