Troubleshooting Guide - Memorex MSP-CR1100 Operating Instructions Manual

Sphere timeball (clock radio with alarm)
Hide thumbs Also See for MSP-CR1100:
Table of Contents

Advertisement

CR1100.O/M.QXD
4/16/02

TROUBLESHOOTING GUIDE

If you experience a problem with this unit, check the chart below before
calling for service.
SYMPTOM
GENERAL
Power does
not come on.
RADIO
No sound.
Noise or sound
distorted on AM
or FM.
CLOCK
Flashing time.
Alarm does not
turn on.
3:51 PM
Page 11
POSSIBLE
POSSIBLE
CAUSE
SOLUTION
AC line cord not
Insert plug firmly
plugged in.
into AC outlet.
ON/OFF/AUTO/BUZZ
Set switch to the
switch not set to ON.
to ON position.
VOLUME control at
Increase the VOLUME.
minimum position.
AM - Interference from Turn the radio for
traffic.
better AM reception.
FM - Antenna Wire
Extend Antenna Wire.
not extended.
Battery connected
Check the battery.
improperly, not con-
nected or dead.
Clock not set.
Set the clock.
ON/OFF/AUTO/BUZZ
Set switch to the
switch not in AUTO or
AUTO or BUZZ
BUZZ position.
position.
Clock is not set.
Set the clock.
Alarm time not set.
Set alarm time.
11

Advertisement

Table of Contents
loading

Table of Contents