Installation; Step 1: Remove Packaging And Parts; Step 2: Route Conduit Through Cutout; Step 3: Secure Oven To Cabinet - GE Advantium SCB2000 Installation Instructions Manual

1
• Open the door and remove packing material
Step
• Locate owners kit in carton. Remove and
Remove
• Locate box with metal trays in carton.
Packaging
• Locate parts package containing 5 mounting
and Parts
2
Step
Route
Conduit
Through
With oven in front of the cabinet opening:
• Insert conduit into cabinet opening.
Cutout
• Lift the oven into the opening while
3
• Slide oven into the cabinet opening.
• Drill 3/32" pilot holes into the cabinet frame
Step
Secure
• Secure oven to cabinet with screws supplied.
Oven
to Cabinet
6
with ceramic tray.
save.
Remove and save.
screws. (4 required, 1 extra)
CAUTION
2 people are required
to lift the oven into the opening. Grasp the
bottom at front and rear. Discard styrofoam
base. DO NOT USE HANDLE TO LIFT
THE OVEN. DAMAGE WILL OCCUR!
continuing to feed the conduit in the
direction of the installed junction box.
Be sure the conduit does not get pinched
between the back of the oven and the
cabinet wall.
through the 4 mounting holes in the oven
front frame.
WARNING
Securely fasten oven to
cabinet using the screws provided. Failure
to do so could cause the oven to move or
tip during use and result in personal injury.

Installation

Built-In Speedcook Ovens
IMPORTANT: To protect the bottom trim, do
not remove the styrofoam shipping base until
the oven is slipped into the opening.
Styrofoam
Shipping Base
Attachment
Screws
Secure Oven To Cabinet
With Screws Provided