Design Information; Product Dimensions; Advance Planning; Tools And Materials Required - GE Advantium SCB2000 Installation Instructions Manual

Product
Dimensions
• These ovens may be installed directly into a
Advance
Planning
• The front surface of the oven will be nearly
• This oven can be installed over any GE/
• This oven must be installed at least 36" above

Tools and Materials Required:

Tools and
• 2 x 4 or 2 x 2 lumber for runners
Materials
• Saw
• Level
Required
• Drill and 3/32" bit
• Phillips screwdriver
• Wood screws and adhesive or other hardware for installing
28-7/16"
(Recessed
Portion)
15-27/32"
29-25/32"
wall or wall oven cabinetry, 30" minimum
width.
flush with surrounding cabinetry doors.
Monogram single electric built-in oven or a
single GE/Monogram electric built-in
warming drawer.
the floor.
runners or shelf to support oven.

Design Information

15"
21-7/8"
IMPORTANT: This oven is not approved
for use above another built-in Speedcook
oven, side by side or under the countertop
installations.
• For personal safety, this oven cannot be
installed in a cabinet arrangement such as an
island or peninsula.
• Cabinets installed adjacent to wall ovens must
have an adhesion spec of at least 194°F
temperature rating.
• Allow for clearance to adjacent corners, walls,
drawers, etc.
Electrical Requirements
• Junction box
• Electrical cable - 3-conductor or 4-conductor wire, as required
by local codes.
• UL listed conduit connector
• Wire cutters and wire stripper
Built-In Speedcook Ovens
27/32"
14-1/8"
9/16"
20-27/32"
27/32"
13"
7/8" 15/32" 11/16"
3