TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
1
3
With a CD inserted, press the
PLAY/PAUSE
button
to turn the unit on and press
the STOP ( )/POWER OFF button
stop auto playback. Press the PROG
button
; the PROG indicator will blink
in the CD display.
3
3
Press the PLAY/PAUSE (
/POWER ON button
Programmed playback and adjust the
VOLUME control
as desired.
NOTES:
•
Press the STOP ( )/POWER OFF button to stop the disc before it is finished.
•
As each program is played, the track number is shown in the display.
•
To clear the memorized program: press the STOP ( )/POWER OFF button
again while in the stop mode, wait approximately 60 seconds and the unit will
turn off or open the CD compartment.
•
Programming is the ability to preselect the order in which a series of tracks
will be played.
•
Each track may be stored in the program memory as many times as desired
(up to 24 tracks).
CD OPERATION (CONTINUED)
2
1
(
)/POWER
1
2
to begin
and DBBS switch
2
3
Select the first track to be played back
ON
using the
to
, then press the PROG button
button
again. Repeat this step to program
additional tracks up to a maximum of
24 tracks.
4
To skip forward or backward through
)
the
programs,
SKIP/SEARCH
button. When the disc is through
playing, it will stop.
11
1
SKIP/SEARCH
1
press
2
or
2
the
or